OMC 400/800 Outdrive Parts - Drawings

www.BoatParts.ca Home Page

OMC ball gear kit 400 800 stringer stern drive

GLM aftermarket OMC ball gear parts for 400-800 outdrive units. Illustrations with exploded drawings

  • GLM Marine aftermarket OMC ball gear kits
  • Tech troubleshooting illustrations
  • Exploded drawing and customer support number

   

Credit card payment for shipping in USA

Credit card payment for shipping in Canada

22050 Ball Gear Kit

22050 ball gear kit

680 Loctite for .020 gap should be used on outside area when installing oil seals in used bearing retainers.

22050 $220.95 US

22050 $291.95 CDN

22020 Ball Gear Upper Gearcase

22020 Ball Gear upper gearcase

609 or 680 Loctite should be used on shaft tapper and spline area when installing ball gear. If compound is not used ball gear may wear out prematurely.

#22020 $130.95 US

#22020 $172.95 CDN

22010 Ball Gear Intermediate Housing

22010 Ball gear intermediate housing

609 or 680 Loctite should be used on shaft tapper and spline area when installing ball gear. If compound is not used ball gear may wear out prematurely.

#22010 $144.95 US

#22010 $191.95 CDN

 

P/N 314579 Press on style ball gear for upper gear case. Does not use ball gear nut - is pressed onto shaft. Should be used with 609 or 680 loctite

#314579
$399.95 US

#314579 $518.95 CDN

22030 Ball Gear Cover

22030 Plug 400-800 series

Silicon or flange mount compound should be used to make a water tight seal.

#22030 $5.95 US

#22030 $7.95 CDN

22327 screw

22327 screw

 
#22327 $4.95 US

#22327 $5.95 CDN

82350

82350

Johnson or Mercury gasket compound needs to be used on both sides of the o ring on used retainers

#82350 $9.95 US

#82350 $12.95 CDN

86080 oil seal

86080 oil seal ball gear

680 Loctite for .020 gap should be used on outside area when installing oil seals in used bearing retainers.

#86080 $20.95 US

#86080 $27.95 CDN

86010 oil seal

86010 oil seal

680 Loctite for .020 gap should be used on outside area when installing oil seals in used bearing retainers.

#86010 $19.95 US

#86010 $25.95 CDN

86090 oil seal

P/N 86090 Press on oil seal for years 1968 thru 1971
Note 2 oil seal are required OEM 981268

#86090 $12.95 US

#86090 $16.95 CDN

23310 Shim kit

23310 Shim kit

Red shim .002
Green shim .003
Tan shim .004
Blue shim .005
Brown shim .010

#23310 Plastic shim set $14.95

#23310 Plastic shim set $17.95

23330 Shim kit

23330 Shim kit

This OMC shim kit is used between the pinion gear and tapper bearing. the ideal per-load is 3-6 pounds you should be able to feel a very small amount of resistance and still be able to turn pinion gear with one finger.

#23330 Metal shim set for upper unit $13.95

#23330 Metal shim set $17.95

27960 Bearing retainer

27960 Bearing retainer

 
#27960 $88.95 US

#27960 $116.95 CDN

21547 400-800 Stringer Outdrive Bearing

21547 400-800 Stringer Outdrive Bearing

 
#21547 $60.95 US

#21547 $79.95 CDN

21544 Bearing

21544 Bearing

 
#21544 $58.95 US

#21544 $77.95 CDN

22330 ball gear nut

22330 ball gear nut

Blue or red loctite thread lock should be used on nut. Silicon or gasket compound should be painted on nut after install to stop unit from rusting.

#22330 $5.95 US

#22330 $7.95 CDN

68015 Loctite

68015 Loctite

68015 Loctite .020 gap for installing seals. Used on tapper section of ball gears

#68015 $20.00 US

#68015 $22.00 CDN

680 loctite tapper area

680 loctite tapper area

680 Loctite .020 gap for installing oil seals. Use on tapper section of ball gears

#680SMALL $8.95 US

#680SMALL $10.95 CDN

508235 OMC Johnson sealing compound

508235 OMC Johnson sealing compound

For use on all o-rings and gaskets

#508235 Gasket compound $24.95 US

#508235 Gasket compound $31.95 CDN